10
2022
-
06
How to measure the size of a glass
Glass cups can drink water, drinks, or tea. Some users will also customize cups according to their needs. Customizing cups requires measuring a lot of data, especially the size. Because the shapes of cups are various, and some cups are irregular in shape, you cannot directly use a ruler to measure the size of the cup. You need a special measurement method to measure the size of the cup, so how to measure the size of the cup?
1. Use a thickness caliper to measure 10mm below the edge of the mouth.
2. The outer diameter of the bottom of the glass is measured with a vernier caliper, and the measurement position is based on the average diameter of the bottom plane of the cup.
3. The outer diameter of the mouth is measured with a vernier caliper, and the measurement position is based on the average diameter of the cup mouth plane.
4. Measure the bottom thickness with a vernier p ruler, and vertically extend the depth gauge of the vernier caliper into the inner side of the cup to the center of the bottom. Record the reading, and then use the vernier caliper to measure the height of the cup body and record the reading. The difference between the two readings minus the height of the recess at the bottom is the thickness of the bottom of the cup.
5. The height of the glass cup is measured with a vernier caliper, and the measurement position is based on the vertical distance from the mouth of the cup to the bottom of the cup.
6. When the height is low and skewed, measure it with a 900 square. Place the sample cup to be tested on a horizontal plane, place one side of the square ruler perpendicular to the plane, and be on the same plane as the central axis of the sample cup, rotate the sample cup, and use a straight ruler to measure the maximum value from the mouth of the cup to the other side of the corner. The difference between the two values of the smaller value is the low skewness of the cup height.
7. Quantity measurement: measure a few milliliters of water at room temperature that is greater than the capacity of the sample cup to be tested with the measuring cylinder, record the reading, then fill the sample cup with water, and record the reading of the remaining water in the measuring cylinder. The difference between the two readings is the For the capacity of the cup, this is related to the size, so it should be well grasped.
The above method can measure the size of some irregular-shaped glass cups, and the manufacturer will also do the next step of production according to the size, you can write down the measured size, and then produce according to the shape and other data provided by the user.